Everybody who is seriously into computers knows how a good cooling setup is an integral part of an enthusiast's machine. They know that if they are able to keep their computers running cool, than they are able to push their computer further than they normally would be able to. Using a good heatsink and fan usually isn't enough as other components can put out a substantial amount of heat on their own.

Lately, the market for cooling products has become saturated, and there is an incredible amount of options available. Thermaltake is known throughout the community for a number of cooling products, namely their Volcano, and Orb series of fans and heatsinks. Today we will be taking a look at the X-Blower cooling kit. The kit includes an aluminum fan controller, as well as two fans, the X-blower and Smart Case Fan II.

Specifications

X-blower Fan

Fan Dimension: 80x80x70 mm
Rated Voltage: 12V
Rated Current: 0.04 ~ 0.50A
Power Input: 0.84 ~ 5.40
FAN Speed: 2100 ~ 4500 ?10% RPM
Temp. Control Setting: NONE
MAX. Air Pressure: 1.1 ~ 7.5mmH2O
Max. Air Flow: 10.9 ~ 26.9CFM
Noise: 25.0 ~ 41.0 dBA
Bearing Type: 2-Ball Bearing
Life Expectation: 75,000 Hours
Connector: 4-Pin

Axial Flow Fan

Fan Dimension: 80x80x25 mm
Rated Voltage: 12V
Rated Current: 0.23 ~ 0.77A
Power Input: 2.40 ~ 8.40 W
FAN Speed: 1300 ~ 4800 ?10% RPM
Temp. Control Setting: 1300 rpm at 20̊C 4800 rpm at 55̊C
MAX. Air Pressure: 1.45 ~ 8.09mmH2O
Max. Air Flow: 20.55 ~ 72.70CFM
Noise: 17.0 ~ 48.0 dBA
Bearing Type: 2-Ball Bearing
Life Expectation: 50,000 Hours
Connector: 3-Pin